ER4043 铝硅焊丝

铝及铝合金焊丝广泛用于铝及其合金氩弧焊及氧-乙炔气焊时作填充材料。氩弧焊是焊接铝及铝合金较完善的方法。氩弧焊可以不用熔剂,但氧-乙炔气焊时必须配铝气焊熔剂共同使用。焊丝的选择,主要根据母材的种类,对接头的抗裂性能,机械性能及抗腐蚀性能等方面的要求综合考虑。

产品详情


标准:

符合GB SAI4043

相当 AWS ER4043

说明:

ER4043是一种通用性较大的铝硅焊丝,焊缝金属具有良好的抗热裂能力,也能保证一定的机械性能。但是在进行阳极化处理的场合,焊缝金属与母材颜色不同。焊接时在铝镁合金焊缝中能生成脆性Mg2Si,使接头的塑性和耐蚀性降低。

ER4043 is a versatile aluminum-silicon welding wire. The weld metal has good thermal crack resistance and certain mechanical properties. However, in the case of anodizing, the color of the weld metal is different from that of the base metal. During welding, brittle Mg2Si can be formed in the welding seam of aluminum-magnesium alloy, which reduces the plasticity and corrosion resistance of the joint.

用途:

用于除铝镁合金以外的铝合金工件和铸件尤其6xxxx系列合金的氩弧焊及氧-乙炔气焊时填充材料,特别对易产生热裂缝的热处理强化铝合金,可获得较好的效果。

It is used as a filler material for argon arc welding and oxygen-acetylene gas welding of aluminum alloy workpieces and castings other than aluminum-magnesium alloys, especially 6xxxx series alloys, especially for heat-treated strengthened aluminum alloys that are prone to hot cracks, and can obtain better results.

焊丝化学成分:

Si Fe Cu Mn Mg Zn T Al
4.5~6.0 ≤0.60 ≤0.30 ≤0.05 ≤0.05 ≤0.10 ≤0.20 余量

供应规格(mm):

盘装规格Φ 1.0 1.2 1.5 2.0 2.5    
焊丝直径Φ
(长度:1000)
1.5 2.0 2.5 3.0 4.0 5.0 6.0

注意事项:

1. 焊前应严格清除工件焊接边缘及焊丝表面的氧化膜和油污等污物。

2. 施焊时可采用垫板托住熔化金属,以保证焊缝的成形。

3. 氧-乙炔气焊时必须配铝气焊熔剂共同使用。

1. Strictly remove the oxide film and oil stains on the welding edge of the workpiece and the surface of the welding wire before welding.

2. When welding, a backing plate can be used to hold the molten metal to ensure the formation of the weld.

3. Oxygen-acetylene gas welding must be used together with aluminum gas welding flux.


合作意向表

如您有任何形式的合作意向,欢迎在此留下您的信息,我们将很快与您联络。


S201 紫铜氩弧焊丝


铜及铜合金焊丝常用于焊接铜及铜合金,其中黄铜焊丝也广泛用于钎焊碳钢、铸铁及硬质合金刀具等。选用适当的焊丝进行氩弧焊是保证铜及青铜焊接质量的有效方法之一,不但可获得性能良好的焊缝而且有利于减少焊件变形。用氧-乙炔气焊时应配合铜气焊熔剂使用,或使用已包有铜气焊熔剂的铜焊丝。碳弧焊也是焊接铜及铜合金的常用方法之一,碳弧焊的焊接工艺和气焊类似,焊丝及熔剂也和气焊时一样。

S211 硅青铜焊丝


铜及铜合金焊丝常用于焊接铜及铜合金,其中黄铜焊丝也广泛用于钎焊碳钢、铸铁及硬质合金刀具等。选用适当的焊丝进行氩弧焊是保证铜及青铜焊接质量的有效方法之一,不但可获得性能良好的焊缝而且有利于减少焊件变形。用氧-乙炔气焊时应配合铜气焊熔剂使用,或使用已包有铜气焊熔剂的铜焊丝。碳弧焊也是焊接铜及铜合金的常用方法之一,碳弧焊的焊接工艺和气焊类似,焊丝及熔剂也和气焊时一样。

S212 低锡磷青铜焊丝


铜及铜合金焊丝常用于焊接铜及铜合金,其中黄铜焊丝也广泛用于钎焊碳钢、铸铁及硬质合金刀具等。选用适当的焊丝进行氩弧焊是保证铜及青铜焊接质量的有效方法之一,不但可获得性能良好的焊缝而且有利于减少焊件变形。用氧-乙炔气焊时应配合铜气焊熔剂使用,或使用已包有铜气焊熔剂的铜焊丝。碳弧焊也是焊接铜及铜合金的常用方法之一,碳弧焊的焊接工艺和气焊类似,焊丝及熔剂也和气焊时一样。