产品详情
标准:
符合GB ECuAl-A2
相当AWS ECuAl-A2
说明:
Cu237是以铝铁青铜为焊芯,药皮为低氢型的铜合金焊条。具有高的强度、耐磨及耐蚀性能优良。采用直流电源,焊条接正极(直流反接)。电弧稳定,操作方便。
Cu237 is a copper alloy electrode with aluminum iron bronze as the welding core and low-hydrogen type copper alloy coating. It has high strength, excellent wear resistance and corrosion resistance. Using DC power supply, the electrode is connected to the positive pole (DC reverse connection). The arc is stable and easy to operate.
用途:
广泛应用于铝青铜、其它铜合金、铜合金与钢的焊接和铸铁的焊补。如各种化工机械、海水散热器、阀门的焊接,水泵、汽缸等堆焊及船舶螺旋桨的修补。
It is widely used in welding of aluminum bronze, other copper alloys, copper alloy and steel, and welding repair of cast iron. Such as the welding of various chemical machinery, seawater radiators, valves, surfacing welding of water pumps, cylinders, etc., and the repair of ship propellers.
熔敷金属化学成分(%)
| Al | Mn | Si | Fe | Cu |
| 7.0~9.0 | ≤2.0 | ≤1.0 | ≤1.50 | 余量 |
熔敷金属力学性能
| 实验项目 | σb (MPa) | δ5 (%) | 硬度 (HV) |
| 保证值 | ≥390 | ≥15 | 120~160 |
参考电流:AC或DC
| 焊条直径(mm) | 3.2 | 4.0 | 5.0 |
| 焊接电流(A) | 90~130 | 140~170 | 170~200 |
注意事项:
1. 焊前焊条须经200℃烘焙一小时。
2. 焊件表面的水分、油污、氧化物等杂质必须清除干净。
3. 铝青铜的焊接和碳钢的堆焊时,薄件不需预热,厚件须预热约 200℃左右。
1. The electrode must be baked at 200°C for one hour before welding.
2. The moisture, oil stains, oxides and other impurities on the surface of the weldment must be removed.
3. When welding aluminum bronze and surfacing welding of carbon steel, thin parts do not need to be preheated, and thick parts must be preheated at about 200°C.
合作意向表
如您有任何形式的合作意向,欢迎在此留下您的信息,我们将很快与您联络。
铜及铜合金焊丝常用于焊接铜及铜合金,其中黄铜焊丝也广泛用于钎焊碳钢、铸铁及硬质合金刀具等。选用适当的焊丝进行氩弧焊是保证铜及青铜焊接质量的有效方法之一,不但可获得性能良好的焊缝而且有利于减少焊件变形。用氧-乙炔气焊时应配合铜气焊熔剂使用,或使用已包有铜气焊熔剂的铜焊丝。碳弧焊也是焊接铜及铜合金的常用方法之一,碳弧焊的焊接工艺和气焊类似,焊丝及熔剂也和气焊时一样。
铜及铜合金焊丝常用于焊接铜及铜合金,其中黄铜焊丝也广泛用于钎焊碳钢、铸铁及硬质合金刀具等。选用适当的焊丝进行氩弧焊是保证铜及青铜焊接质量的有效方法之一,不但可获得性能良好的焊缝而且有利于减少焊件变形。用氧-乙炔气焊时应配合铜气焊熔剂使用,或使用已包有铜气焊熔剂的铜焊丝。碳弧焊也是焊接铜及铜合金的常用方法之一,碳弧焊的焊接工艺和气焊类似,焊丝及熔剂也和气焊时一样。
铜及铜合金焊丝常用于焊接铜及铜合金,其中黄铜焊丝也广泛用于钎焊碳钢、铸铁及硬质合金刀具等。选用适当的焊丝进行氩弧焊是保证铜及青铜焊接质量的有效方法之一,不但可获得性能良好的焊缝而且有利于减少焊件变形。用氧-乙炔气焊时应配合铜气焊熔剂使用,或使用已包有铜气焊熔剂的铜焊丝。碳弧焊也是焊接铜及铜合金的常用方法之一,碳弧焊的焊接工艺和气焊类似,焊丝及熔剂也和气焊时一样。